Mohanraj
Solve the problems of the printer and print
More printer units connected to your computer caused the problems, and
that the multiplicity of aspects that cause problems or that do not work
properly, in case of any problem must be sure of some of the basics:
- Is the data cable connected to your computer and properly installed?
- Is the printer connected to electricity in developing On?
- Is there paper in the printer?
- Is the printer ready to print Online?
And then go to the following items, which explains how to react to the problems of the printer or printing.
The printer does not print completely or partially
Make sure that the paper print a topic in the right place, and his allowing the printer and checked the paper size correctly according to the order of printing. If everything is fine, do one or more of the following:
- Close the printer and disconnect the power for a minute at least, it will work to clear the printer's memory Printer RAM or Memory, and then restart the printer (if the printer is not the key On / Off Sign off power cord and then reconnect it).
- Make sure that the unit is C: 10MB of free space at least, if not also edit some areas., You can use the Disk CleanUp. System Tools
- Make sure the status of the print may be parked temporarily Pause, and to do so from the Start menu to Settings Sign checked, and then Printers dialog box, click the printer icon and choose the right, if you find a sign? Next to Pause Printing Sign clicking the Pause Printing to re-run printing
- Make sure that the printer settings are correct. Sign from the Start menu check the Settings, then choose Printers, and then click the printer icon and choose the right menu, then select Properties, make sure that the printer is connected to correct port) usually (LPT1
- Make sure the timing of printing Printer Timeout. From the Start menu Sign ticked on Settings and then click Printers and then click the printer icon and choose the right menu, then select Properties, and dialog box, click the tab Details and then increase the time by 15 seconds this time that Windows uses to wait before shutting down the print . See Figure 2
- Make sure that the printer is dedicated as the default printer, you may be the default printer that is sending a print to the other one is installed on your computer, and thus sent to print whatever you will not find anything. To customize the printer as the default printer, right-click the printer icon and choose "Set As Default
* If you print a document that contains a large volume of graphics you may see part of the print without printing the rest of the document, in this case, the memory is installed inside the printer is not enough. You can print the document by using lower quality. Of the program that you use to send print the File menu and choose Print and then click the Options button and then select the check box. Draft Output
* If you are printing some pages did not complete the rest of the pages. Of the program that you use the File menu and choose Print and Print dialog box, select the check box under the All Pages. Range
Printer fees in poor color printers
If you install a color printer (ink), you must adjust and calibrate the printing Cartridge (dares) and the printer itself, in accordance with the instructions that come with the printer, also follow the same instructions in the event of a change Cartridge (cartridge) black ink and color.
The graphic settings in Windows may cause poor print graphics of, so make sure your Windows settings for graphics, and by following these steps:
1 - Sign from the Start menu checked and then click on Settings. Printer
2 - Right-click the printer icon and then choose from the list. Properties
3 - Activate the Graphics tab to activate it
4 - increase the print quality to the maximum degree select the appropriate check box.
5 - Click Ok button to save the change. See Figure 3
Ink problems
Sometimes it happens that you find some spots or white lines within the print, and this means that the toner cartridge on the verge of force, or because of non-use of ink for a long time, making it dry, and usually when you buy ink make sure of the date of completion, it is very important, the ink is dry before you are using., do not try to clean the ink cartridge dry with paper, do not try to touch the ink exit port was hit by embolism, in general, follow the instructions that come in a box of ink.
Error Message
Most of the previous problems could cause the emergence of the famous message Error Printing to LPT1, remove the cause of the complaint and the message will disappear
If the message continues to appear and there you have any problem, maybe there was a problem because computer can not print from the type of Enhanced **** file (EMF). You can convert RAW to the printing system may resolve the problem. To do that activate the Details tab of the Printer Properties dialog box and then click the button Spool Settings dialog box appears Spool Settings, from the dropdown menu Spool Data Format Select type RAW, and then click the button. Ok Ok also click the button of the dialog box to save the change.
Print or the printer is slow
Printer of course, slower computer units especially during the print images and shapes, but you can take some steps to speed up printing, such as:
- You must have a large area of free hard drive C: where printing uses Windows temporary files. Temp
- If the printing speed is more important than the current work, close all programs until the end of printing.
- Increase the internal printer memory.
- Install the latest drivers, or update your printer driver whenever a new version
- Use the pattern of special characters to the printer, also use the patterns of type True Type Fonts are always the fastest during printing
- Reduce the print quality of Graffy
Posted in: 
0 comments:
Post a Comment