Mohanraj
You may one day need to disassemble your iPhone to change the battery, a broken screen or other.
iPhone France you cleared the way with this tutorial
Before know that obviously you will lose your Apple warranty, you should also know that the disassembly / reassembly almost always leaves its mark on the hull of the iPhone, and of course has the slightest false manip iPhone will be good for the trash Clin eye
So proceed at your own risk!
Tools:
A small Phillips screwdriver
a craft knife or scalpel
a pick or a thin plastic very rigid (avoid metal objects you could make scratches)
You have time, you are relaxed, your iPhone is off? OK here we go!
0 - drawer out of the sim card.
1 - Turn the black cap at the bottom of the iPhone, everyone has his technique but in the end we galley
insert the blade of a knife between the Hook and black cape (there are 2 clips behind) then attack from the side edge between silver and black cape. You have to force a little.
iPhone France you cleared the way with this tutorial
Before know that obviously you will lose your Apple warranty, you should also know that the disassembly / reassembly almost always leaves its mark on the hull of the iPhone, and of course has the slightest false manip iPhone will be good for the trash Clin eye
So proceed at your own risk!
Tools:
A small Phillips screwdriver
a craft knife or scalpel
a pick or a thin plastic very rigid (avoid metal objects you could make scratches)
You have time, you are relaxed, your iPhone is off? OK here we go!
0 - drawer out of the sim card.
1 - Turn the black cap at the bottom of the iPhone, everyone has his technique but in the end we galley
insert the blade of a knife between the Hook and black cape (there are 2 clips behind) then attack from the side edge between silver and black cape. You have to force a little.
2 - That is the most complicated step, remove the casing without damage.
why remove the 3 small screws already aligned at the bottom of the hull. This is where it gets complicated, in fact the shell is fitted on just the iPhone but it is super good! Attack by one side, slide a small screwdriver behind the hull and on the side with the pick and try to insert between the edge and silver shell and widen the gap little by little to the top ... we do not annoyed ... it's great galley but also very fragile so take your time .. the same on the other side and hop it's good just the shell, remove the connector on the motherboard.
3 - Disconnect the 3 son delicately white, they are just clipped (attention to that between the motherboard and the battery, it is often a block of insulating glue).
4 - Unscrew the 3 screws that hold the motherboard. Gently pull the battery was using a small screwdriver (it is a bit stuck) and then disconnect the four connectors on the motherboard with a tongue by pulling gently. Leaving the motherboard, the camera will come with it is just fitted and held by a connector.
5 - Unscrew the 10 screws around the frame, you can go out and the rim that holds the silver screen. (One screw is a bit hidden on the lower level of HP)
6 - by 3 screen like clip on each side of the iPhone, first one side and gently peel off the screen with the aid of a cutter from the bottom of the iPhone, Caution is well bonded and especially Fragile! At the top, be careful with connectors on the motherboard.
That for the most winding technique is to re-connect the motherboard, you should gently take off the tongue in S for the space to re-connect the 4 connectors.
Posted in: 
0 comments:
Post a Comment